How to make FVDI J2534 diagnostic interface work with Nissan Consult

You need modify DiagnosticTool.ini

Try with this:

[current_geographical_zones]

market=2

area=3

country=Z31

[current_language]

language=GB

[unit_conversion]

unit_conv_1=G001.S001

unit_conv_2=G002.S003

unit_conv_3=G003.S005

unit_conv_4=G004.S007

[current_channel]

channel=0

[system_management]

access_mode=1

[device]

vi_device_name=REPLACE THIS WITH YOUR J2534 DEVICE NAME

[mode]

debug_mode=TRUE

debug_mode_vehicle_battery=TRUE

Note: if it gives you Connections failure to VI

Touch show detail and confirm the detail

That is,

the vi_device_name is not correct, I was have the same problem with vas5054 and actia xs as passthru.

You need check your correct device name, Its very important because consult needs call your device driver.

Try on device properties to search the device name.

Download: Nissan Consult 3 and Consult 4 confirmed to work well with FLY FVDI

HomeGrownRadioNJ